Three operating methods of measuring erythrocyte sedimentation level by using the Westergren method of ESR Tubes

Method One:

1.8ml or 2ml 13*75 or 13*100mm ESR blood collection tube, use a pipette to transfer the blood to the specified scale of the thin glass tube, place it on the blood sedimentation rack, which is time-consuming and laborious, and then observe and read the data manually.

Method Two:

1.8/1.6/1.24ml 8*120mm slender tubes are directly inserted into the rack, eliminating the trouble of transfer and manual reading after half an hour.

Method Three:

1.8/1.6/1.24ml 8*120mm slender tube is directly inserted into the machine and the machine reads the reading.

Accurate and reliable: advanced optical detection device, automatic temperature compensation .

Clean: the whole process of specimen detection is closed to avoid operator and laboratory environment pollution .

Fast and efficient: the instrument has a fast detection speed, and it only takes 30 minutes to measure the final ESR value, which corresponds to the result of 1 hour of the traditional Westergren method, greatly shortening the measurement time and omitting the tedious procedures such as manual timing and reading.

Quick and easy: Measure specimens randomly at any time.

Volume monitoring: when the blood height of the specimen is 50-64mm, it will be automatically adjusted by the machine software. If not, there will be an "ERL" error message, avoiding the inaccurate results caused by inaccurate blood collection in the manual method.